Skip to main content
Version: latest

Rook Ceph

Versions Supported​

Rook on Edge Clusters​

To use Rook-Ceph on Edge clusters, you need to make a few changes to the cluster profile depending on your cluster configuration.

  1. In the YAML file for BYO-OS pack, add the following blocks to the stages configuration in the OS pack of the cluster profile.

    stages:
      initramfs:
        - files:
            - path: /etc/modules-load.d/ceph.conf
              permissions: 644
              owner: 0
              group: 0
              content: |
                rbd
                ceph
              encoding: ""
              ownerstring: ""
      after-upgrade:
        - name: "Erase Old Partitions on Boot Disk"
          commands:
            - wipefs -a /dev/sdb

  2. Click on the Rook-Ceph layer. In the upper-right corner of the Rook-Ceph layer's YAML editing interface, click Presets. Set the preset to either single-node or multi-node depending on your cluster configuration.

  3. If you chose the Single Node Cluster preset, skip this step.

    If you chose the Multi Node Cluster with Replicas preset, set the value of manifests.storageClass.volumeBindingMode to Immediate.

Access Ceph Dashboard​

The Ceph dashboard gives you an overview of the status of your Ceph cluster, including overall health, and the status of all Ceph daemons. By default, the Dashboard is exposed as a ClusterIP-type service on the port 7000 on single node clusters.

  1. Issue the following command to view the service and find its cluster IP and port.

    kukubectl --namespace rook-ceph get svc | grep dashboard
    rook-ceph-mgr-dashboard   ClusterIP   192.169.32.142   <none>        7000/TCP            15m

  2. If you are on a node of the cluster, you can visit the dashboard by visiting the cluster IP and the exposed port.

    If you are remotely accessing the cluster, you can issue the following command to enable port forwarding from your local machine to the dashboard service.

    kukubectl port-forward svc/rook-ceph-mgr-dashboard -n rook-ceph 8443:7000 &

    If your dashboard service is exposed on a different port, replace 7000 with the port that the dashboard service is exposed on.

  3. Once you can connect to the dashboard, you need to provide the login credentials to access the dashboard. Rook creates a default user named admin and generates a secret called rook-ceph-dashboard-password in the namespace of the Rook-Ceph cluster. To retrieve the generated password, issue the following command:

    kubectl -n rook-ceph get secret rook-ceph-dashboard-password -o jsonpath="{['data']['password']}" | base64 --decode && echo

  4. Use the password you receive in the output with the username admin to log in to the Ceph Dashboard.

Known Issues​

  • If a cluster experiences network issues, it's possible for the file mount to become unavailable and remain unavailable even after the network is restored. This a known issue disclosed in the Rook GitHub repository. Refer to the Troubleshooting section for a workaround if you observe this issue in your cluster.

Troubleshooting​

File Mount Becomes Unavailable after Cluster Experiences Network Issues​

A known issue exists with Rook-Ceph where file mounts become unavailable and remain unavailable even after network issues are resolved.

Debug Steps​

  1. One way to debug is to reboot the node that is experiencing the issues. If you are unable to reboot the node, or if rebooting the node does not fix the issue, continue to the following steps.

  1. Connect to your cluster via the command-line. For more information, refer to Access Cluster with CLI

  2. Issue the following command to identify Persistent Volume Claims (PVC) from Ceph File System (FS).

    kubectl get pvc --all | grep "cephFS"

  3. Scale down all workloads, including pods, deployments, and StatefulSets using the PVC to zero.

    To scale down a deployment, use the following command. Replace deployment-name with the name of the deployment.

    kubectl scale deployment deployment-name --replicas=0

    To scale down a StatefulSet, use the following command. Replace statefulset-name with the name of the StatefulSet.

    kubectl scale statefulset statefulset-name --replicas=0

    To scale down a pod, delete it. Make sure you delete the deployments and StatefulSets first. If a pod belongs to a StatefulSet or a deployment, it will simply be recreated.

    kubectl delete pods pod-name
    tip

    If you do not know which workloads use the PVC, you can start by getting a list of all pods that are using PVCs and their PVC names with the following command.

    kubectl get pods --all-namespaces --output=json | jq '.items[] | {name: .metadata.name, namespace: .metadata.namespace, claimName: .spec |  select( has ("volumes") ).volumes[] | select( has ("persistentVolumeClaim") ).persistentVolumeClaim.claimName }'

    You can then find workloads that are associated with the pods and scale them down to zero.

  4. Once all the workloads are scaled down, all existing volume mounts will be unmounted, followed by fresh new mounts of cephFS volumes. Ensure that all workloads are scaled down to zero. Even if one pod remains that uses the PVC, the unmount will not happen and the issue will not be resolved.

  5. Scale the workloads back to their original state.

Terraform​

data "spectrocloud_registry" "registry" {
  name = "Public Repo"
}

data "spectrocloud_pack_simple" "csi-rook-ceph" {
  name    = "csi-rook-ceph"
  version = "1.14.0"
  type = "helm"
  registry_uid = data.spectrocloud_registry.registry.id
}