Skip to main content
Version: latest

Rocky and Palette eXtended Kubernetes

This guide teaches you how to use the CAPI Image Builder tool to create a custom Rocky Linux image with Palette eXtended Kubernetes (PXK) for VMware vSphere and then use this image to create a cluster profile.

tech preview
This is a Tech Preview feature and is subject to change. Do not use this feature in production workloads.

Prerequisites

  • Access to the VMware vSphere environment, including credentials and permission to create virtual machines.

  • The machine executing the commands must have the following hardware resources available:

    • 4 CPU
    • 8 GB of RAM
    • 50 GB of free disk space
  • The following software installed:

Build Custom Image

  1. Open up a terminal session in your Linux machine and download the CAPI Image Builder version 1.5.0.

    docker pull gcr.io/spectro-images-public/imagebuilder/capi-builder:v1.5.0

    Confirm that the image was downloaded correctly.

    docker images
    REPOSITORY                                               TAG       IMAGE ID       CREATED      SIZE
    gcr.io/spectro-images-public/imagebuilder/capi-builder v1.5.0 1d891fc2e8da 6 days ago 2.5GB
  2. Create an output directory to store the image files and set the required permissions.

    mkdir /home/ubuntu/output
    chmod a+rwx /home/ubuntu/output
  3. Navigate to the output directory.

    cd /home/ubuntu/output
  4. Download the Rocky Linux ISO file into the output directory. Ensure you download the x86_64 DVD ISO and not the x86_64 BOOT ISO.

    This guide uses Rocky 8 as an example. Refer to the Configuration Reference page for details on supported operating systems.

    curl https://download.rockylinux.org/pub/rocky/8/isos/x86_64/Rocky-8-latest-x86_64-dvd.iso --output Rocky-8-latest-x86_64-dvd.iso
  5. Calculate the SHA256 checksum for the Rocky ISO you downloaded. The calculation might take a few minutes. Save the output, as you will need it later.

    sha256sum Rocky-8-latest-x86_64-dvd.iso

    The output should be similar to the sample output displayed below.

    642ada8a49dbeca8cca6543b31196019ee3d649a0163b5db0e646c7409364eeb  Rocky-8-latest-x86_64-dvd.iso
  6. Download the imageconfig template file.

    curl https://software.spectrocloud.com/tools/capi-image-builder/imageconfig --output imageconfig
  7. Open the imageconfig template file in an editor of your choice and fill in the required parameters. For a complete list of parameters, refer to the Configuration Reference page. Additionally, refer to the Compatibility Matrix for a list of supported Kubernetes versions and their corresponding dependencies.

    The imageconfig is the file you use to set up the CAPI Image Builder according to your requirements. This includes specifying the OS type, Kubernetes version, whether the image should be FIPS compliant, and more.

    Use the example configuration below for building a Rocky 8 CAPI image. Replace <iso-checksum> with the Rocky ISO checksum you calculated in step 5 of this guide. Additionally, replace the VMware-related placeholders with the values from your VMware vSphere environment.

     # Define the OS type and version here
    # os_version=rhel-8 | rhel-9 | rockylinux-8 | rockylinux-9
    # image_type=standard | fips
    os_version=rockylinux-8
    image_type=standard

    # Define the image name
    # image_name=<Final Image Name to create>
    image_name=rocky-8

    # Define the Cloud type
    # cloud_type=vmware
    cloud_type=vmware

    # Define the Component Versions
    #
    # containerd crictl and cni version update should be done
    # only if the images are available in the upstream repositories
    k8s_version=1.28.9
    cni_version=1.2.0
    containerd_version=1.7.13
    crictl_version=1.26.0

    # Define RHEL subscription credentials(if $image_type=rhel)
    # used while image creation to use package manager
    #rhel_subscripocky-8user=
    #rhel_subscription_pass=

    # Define ISO url(if image is rhel or rockylinux)
    iso_name=Rocky-8-latest-x86_64-dvd.iso
    iso_checksum=<iso-checksum>

    # Define AWS infra details
    aws_access_key=
    aws_secret_key=

    # Define Vmware infra details
    vcenter_server=<vcenter-server>
    vcenter_user=<vcenter-user>
    vcenter_password=<vcenter-password>
    vcenter_datacenter=<vcenter-datacenter>
    vcenter_datastore=<vcenter-datastore>
    vcenter_network=<vcenter-network>
    vcenter_folder=<vcenter-folder>
    vcenter_cluster=<vcenter-cluster>
    vcenter_resource_pool=<vcenter-resource-pool>

    # Optional: for OVA based builds
    vcenter_template=

    # Define Azure infra details
    azure_client_id=
    azure_client_secret=
    azure_subscription_id=
    azure_location=
    azure_storage_account=
    azure_resource_group=

    # Define GCE infra details
    google_app_creds=
    gcp_project_id=

    # Airgap Configuration
    airgap=false
    airgap_ip=""
    k8s_rpm_key=
    k8s_rpm_server=
    containerd_url=
    crictl_url=
    k8s_container_reg=
    cert_url=
    tip

    To build a FIPS-compliant image, set image_type to fips.

    Once you are done making the alterations, save and exit the file.

  8. Issue the command below to start the CAPI Image Builder container and assign the container ID to the BUILD_ID variable. The tool will create and configure a VM named rocky-8 with Dynamic Host Configuration Protocol (DHCP) in your VMware vSphere environment. It will then generate a Rocky 8 CAPI image from the VM and save it to the output directory specified in step 2 of this guide.

    BUILD_ID=$(docker run --net=host --volume /home/ubuntu/output:/home/imagebuilder/output  --detach  gcr.io/spectro-images-public/imagebuilder/capi-builder:v1.5.0)

    If you need the VM to use static IP placement instead of DHCP, follow the steps described below.

    CAPI Image Builder with Static IP Placement
    1. Download the Rocky 8 ks.cfg file from the Image Builder GitHub repository directly into the output folder.

      curl --location https://github.com/kubernetes-sigs/image-builder/raw/main/images/capi/packer/ova/linux/rockylinux/http/8/ks.cfg --output ks.cfg
    2. Open the ks.cfg file in an editor of your choice. Locate and replace the network line network --bootproto=dhcp --onboot=on --ipv6=auto --activate --hostname=capv.vm with the configuration below.

      network --bootproto=static --ip=<vcenter-static-ip-address> --netmask=<vcenter-netmask> --gateway=<vcenter-gateway> --nameserver=<vcenter-nameserver>

      Then, replace <vcenter-static-ip-address> with a valid IP address from your VMware vSphere environment, and <vcenter-netmask>, <vcenter-gateway>, and <vcenter-nameserver> with the correct values from your VMware vSphere environment.

      Once you are finished doing the alterations, save and exit the file.

    3. Issue the command below to start the CAPI Image Builder container and assign the container ID to the BUILD_ID variable. The tool will use the imageconfig file to create and configure a VM with static IP placement in your VMware vSphere environment.

      BUILD_ID=$(docker run --net=host --volume /home/ubuntu/output:/home/imagebuilder/output  --detach  gcr.io/spectro-images-public/imagebuilder/capi-builder:v1.5.0)
  9. Execute the following command to view the CAPI Image Builder container logs and monitor the build progress.

    docker logs --follow $BUILD_ID
    info

    It may take a few minutes for the logs to start being displayed, and the build takes several minutes to complete.

  10. Once the build is complete, the Rocky 8 CAPI image will be downloaded to a folder named rocky-8 within the output directory on your machine, and the VM will be deleted from VMware vSphere. Issue the command below to confirm that the build files are present in the output directory.

    ls rocky-8
    packer-manifest.json  rockylinux-8-kube-v1.28.9.mf  rockylinux-8-kube-v1.28.9.ovfrocky-8-disk-0.vmdk  rockylinux-8-kube-v1.28.9.ova  rocky-8.ovf rockylinux-8-kube-v1.28.9.ova.sha256
  11. To make the image available in VMware vSphere, log in to your environment and locate the vcenter_folder you defined in step 7 of this guide.

    info

    You can also use the following steps to make the image available in a VMware vSphere environment that is not connected to the one you used for building the image.

  12. Right-click the folder and select Deploy OVF Template to deploy a VM using the Rocky 8 OVA file that was built in step 8 of this guide.

  13. In the Deploy OVF Template wizard, click Local File, then Upload Files, and select the rockylinux-8-kube-v1.28.9.ova file from the output folder on your local machine. Click Next to continue.

  14. Assign a name to the virtual machine, such as rockylinux-8-kube-v1.28.9, and select the folder you created previously as the target location. Click Next to proceed.

  15. Select a compute resource and click Next.

  16. Review the VM configuration, accept the license agreements, and click Next.

  17. Select the storage location and network configuration and click Next. Then, click Finish to deploy the VM.

    warning

    It takes a while for the VM to deploy, approximately 45 minutes or more, depending on your internet connection. The download of the OVA file takes up the majority of the time. You can monitor the progress of this process in VMware vSphere by looking at the Recent Tasks tab and filtering the Task Name column by Deploy OVF Template.

  18. Once the VM is created, right-click it and select Convert to Template. This will convert the VM into a Rocky 8 image template that you can reference during the cluster profile creation.

Create Cluster Profile

The Rocky 8 image is now built and available in the VMware vSphere environment. You can use it to create a cluster profile and deploy a VMware host cluster.

  1. Log in to Palette and select Profiles from the left Main Menu.

  2. Click Add Cluster Profile and follow the wizard to create a new profile.

  3. In the Basic Information section, assign the cluster profile a name and a brief description, and select the type as Full. Click Next.

  4. In the Cloud Type section, select VMware and click Next.

  5. The Profile Layers section is where you specify the packs that compose the profile. For this guide, use the following packs:

    Pack NameVersionLayer
    BYOOS1.0.0Operating System
    Palette eXtended Kubernetes1.28.9Kubernetes
    Cilium1.15.3Network
    vSphere CSI3.2.0Storage

    Reference the custom Rocky 8 image template path in your VMware vSphere environment when populating the pack details for the BYOOS layer.

    pack:
    osImageOverride: "/Datacenter/vm/sp-docs/rockylinux-8-kube-v1.28.9"
    osName: "rockylinux"
    osVersion: "8"

    As you fill out the information for each layer, click Next to proceed.

    warning

    The Palette eXtended Kubernetes pack version must match the Kubernetes version specified in the imageconfig file.

  6. Review the profile layers and click Finish Configuration to create the cluster profile.

  7. Deploy a VMware host cluster using the created cluster profile. Refer to the Deploy App Workloads with a PCG tutorial for instructions on deploying a VMware host cluster.

Validate

  1. Log in to the VMware vSphere environment and navigate to the Inventory view.

  2. Select the VMs and Templates tab and verify the custom Rocky 8 image is available.